Projects, Thesis, Final Year Projects, IT, MBA, Seminar

ECE Project On Line Following Project (8 Bit Microcontroller)

This is a ECE Project Report on Line Following Autonomous Robot is based on 8 bit Micro-controller AT89C2051. This Robot follows the black line which is drawn over the white surface or it follows the white line which is drawn over the black surface. The infrared sensors are used to sense the line. When the infrared signal falls on the white surface, it gets reflected and if it falls on the black surface, it is not reflected this principle is used to scan the Lines for the Robot.
You can also Subscribe to PROJECTSWORLDS by Email for more such projects and seminar.

All the above systems are controlled by the Microcontroller. In our project we are using the popular AT89C2051 8 bit Micro-controller. It is a 20 pin micro-controller. The AT89C2051 Micro-controller is used to control the motors. It gets the signals from the infrared sensors and it drives the motors according to the sensor inputs. Two stepper motors are used to drive the robot.

For more updates on Projects via E-mail or Sms Subscribe to

Projects, Thesis, Final Year Projects, IT, MBA, Seminar

Donate To Maintain This Blog

Dear Readers, Donate (INR 1/-)At-least To Maintain This ProjectsWorlds

Total Pageviews

Most Popular Posts

DEAR READERS: As There is problem in It is changed to

For Any Feedback and Suggestions send mail.

If There is any problem in the Document View or Download please send mail to

Enter your email address:

Delivered by FeedBurner


ProjectsWorlds. Powered by Blogger.